Hydraulic Hose, Fitting and Ferrule Supplier
From our base in the İvedik Organised Industrial Zone in Ankara we supply hydraulic connection components to DIN and SAE standards across Türkiye. Every size from 1/4″ to 2″ is held in stock.
Deep Stock
All fitting types, including intermediate sizes, ready in our warehouse.
Standards Compliance
DIN EN 853, EN 856, EN 857 and the SAE 100 R series.
Fast Dispatch
Same-day delivery within Ankara, nationwide shipping across Türkiye.
Technical Support
We help you match the right hose with the right fitting.
Our Product Groups
We supply three main product groups: hydraulic hoses, fittings and ferrules. Matching all three correctly is what determines whether the assembly seals properly and holds its rated pressure.
Hydraulic Hoses
The reinforcement layer sets the pressure rating and the inner diameter sets the flow. Every hose class from s...
Hydraulic Fittings
We supply fittings in metric, BSP, JIC, ORFS and SAE flange connection systems, in every size, with straight,...
Hose Ferrules
Steel collars that join hose and fitting by crimping. Available in skive and non-skive types to match the rein...
Featured Products
All products →
Single Braid Hydraulic Hose 1SN
- Standard
- DIN EN 853 1SN
- Inner diameter
- DN 32 (1 1/4″)
- Reinforcement
- Single wire braid
- Working pressure
- 60 bar
Double Braid Hydraulic Hose 2SN
- Standard
- DIN EN 853 2SN
- Equivalent
- SAE 100 R2AT
- Inner diameter
- DN 25 (1″)
- Reinforcement
- Double wire braid
Four Spiral Reinforced Hose 4SP
- Standard
- DIN EN 856 4SP
- Inner diameter
- 3/8″ (DN 10)
- Reinforcement
- Four-layer spiral
- Working pressure
- 445 bar
Metric Straight Fitting 1/4" 10L
- Connection
- Metric 24°
- Series
- L (light)
- Body
- Straight
- Thread
- M16 × 1,5 (10L)
Metric 90° Fitting 1/2" 15L
- Connection
- Metric 24°
- Series
- L (light)
- Body
- 90°
- Thread
- M22 × 1,5 (15L)
Non-Skive Ferrule
- Type
- Non-skive
- Compatible hose
- 1SN · 2SN · 2SC
- Diameter range
- DN 6 – DN 51
- Material
- Steel
Hose Standards and Working Pressures
All standards →Hose selection is based on working pressure and inner diameter. The table below summarises the most commonly used types.
| Standard | Reinforcement | Inner diameter | Max. working pressure | Typical use |
|---|---|---|---|---|
| DIN EN 853 1SN | Single wire braid | 1/4″ – 2″ | 225 bar | Medium-pressure hydraulic lines |
| DIN EN 853 2SN | Double wire braid | 1/4″ – 2″ | 415 bar | Construction machinery, presses |
| DIN EN 857 2SC | Double braid, tight bend radius | 3/16″ – 1 1/4″ | 360 bar | Tight-space installations |
| DIN EN 856 4SP | Four-layer spiral | 3/8″ – 2″ | 445 bar | Heavy duty, impulse loads |
| DIN EN 856 4SH | Four-layer spiral | 1″ – 2″ | 420 bar | High-flow main lines |
| SAE 100 R2AT | Double wire braid | 1/4″ – 2″ | 415 bar | General hydraulic applications |
| SAE 100 R3 | Double textile braid | 3/16″ – 1″ | 88 bar | Low pressure, return lines |
| SAE 100 R15 | Multi-layer spiral | 3/8″ – 1 1/4″ | 420 bar | 6000 PSI class heavy duty |
Values are nominal references; the exact pressure limit varies with inner diameter. Contact us for project-based selection.
Applications
Construction Machinery
Excavator, loader, forklift and crane hydraulics. Spiral hoses built for impulse loading.
Agricultural Machinery
Tractor lift systems, combine harvesters, trailers and balers.
Industrial Plant
Hydraulic presses, injection moulding machines, steel and cement plants.
Mining
Abrasive environments and high pressure. 4SP/4SH class spiral reinforced lines.
Automotive and Workshops
Tipper systems, vehicle lifts and service workshops.
Marine
Deck equipment, winch and steering hydraulics. Corrosion-resistant connections.
Technical Information
If you are not sure what the part in your hand is, these pages will help you determine the correct size and connection type. Each one includes dimension tables.
10-row dimension table
What Is a JIC Fitting? 37° Flare Connection and Size Table
A JIC fitting is an inch-sized connection that seals through a 37 degree flare seating metal against metal. Th...
8-row dimension table
What Is an ORFS Fitting? O-Ring Face Seal Connection and Sizes
An ORFS (O-Ring Face Seal) fitting uses an O-ring in its end face so the joint does not leak even under vibrat...
15-row dimension table
Hydraulic Fitting Sizes and Thread Table
If you do not know the size of the fitting in your hand, this page is all you need. Measure the outside diamet...
10-row dimension table
How to Choose a Hydraulic Hose — 7 Steps to the Right Hose
A wrongly chosen hose either bursts early or stops the machine. We work through the seven questions that need...
10-row dimension table
The Difference Between 1SN, 2SN, 2SC, 4SP and 4SH Hose
The 1SN, 2SN, 2SC and 4SP markings printed on a hose describe its reinforcement. We explain how many wire laye...
9-row dimension table
BSP, NPT and Metric Threads — Which Fits What?
BSP and NPT look alike but do not fit — one is 55° and the other 60°. This page covers the differences between...
Contact Us for a Quote
Just send us the product list, quantities and delivery address. If you are unsure about a size, send a photo of the part.